The development and research of technology of the block of cylinders casting.
Abstract
The article presents a unique way of obtaining of cylinder blocks castings made of gray cast iron without the use of standard equipment. The technology makes it possible to produce castings in the small-scale production mode without significant capital costs, which is very important in the absence of long-term investments and sanctions for Russian defense enterprises and heavy engineering. The article analyzes the operation mode of the cylinder block casting, in accordance with this, the casting material is selected. The impossibility of casting obtaining of cylinders block R6 based on traditional technology for V8 is substantiated. The new method for forming internal cavities and external surfaces of a casting with the use of dispersed waste of machine-building enterprises is proposed. The heat treatment mode for removing internal stresses and stabilizing the casting size has been developed. The methods for correcting defects in castings are proposed.
References
Budanov E.N. (2006) About new tendencies of development of foundry technologies in 2007. J Leeteinoe proizvodstvo 12:2-8.
Dragiov B.X., Krugolev M.G., Obukhov V.S. (1987) Design of intake and exhaust ducts of internal combustion engines, Vishcha shk, Kiev, 175 p.
Dubrovsky V.A., Arbuzov I.A. (2002) The experience of manufacturing castings of a rocket engine in rod packs. J Leeteinoe proizvodstvo 3:13-15.
Ferguson C.R., Kirkpatrick A.T. (2016) Internal Combustion Engines: Applied Thermosciences. John Wiley & Sons Ltd, 459 p.
Gorsky A.I. (1978) Calculation of machines and mechanisms of automatic lines of foundry production. Mechanical Engineering, Moscow, 315 p.
Grekhov L.V., Ivashchenko N.A., Markov V.A. (2013) Internal combustion engines. T. IV-14. Mashinostroenie, Moscow, 784 p.
Grudskii Yu.G.(182) Designing induction systems for high-speed diesel engines. Mechanical Engineering, Moscow, 151 p.
Henkin V.I. (2013) Mechanized and automatic molding lines. BSTU, Bryansk, 172 p.
Ingo Gross, Frank Ioldert (2010) Mechanized molding plants with cold-hardening mixtures. J Leeteinoe proizvodstvo i tekhnologiia liteinogo dela 1:14-17.
Kanicki D.P. (1994) Changing casting demands shape Ford's new foundry. J Leeteishchik Rossii 9:24-27.
Kolpakov A.A., Zuev M.P. (2002) Mastering the production of castings of the cylinder block of a diesel engine at OAO GAZ. J Leeteishchik Rossii 3:16-25.
Popov A.A. (2002) Stump rod form, rod package and prospects of modern casting processes. J Leeteishchik Rossii 3:30-34.
Safronov G.N., Safronov N.N., Kharisov L.R (2015 The use of SHS-process slag for the preparation of foundry sand. J IOP Conference Series: Materials Science and Engineering 86:1-4. doi:10.1088/1757-899X/86/1/012023
Shulyak V.S. (2008) Automatic complexes in foundry manufacture. MGIU, Moscow, 132 p.
Vanshejdt V.A. (1964) Diesel engines. Directory. Mechanical Engineering, Leningrad, 600 p.
Vdovin K.N., Feoktistov N.A., Pivovarova K.G., Deryabin D.A., Khrenov I.B. (2016) Investigation of the properties of refractory filler of cold-hardening mixtures. J Leeteinoe proizvodstvo 6:13-17.
Vyrubov D.N., Efimov S.I., Ivashchenko I.A. (1984) Internal combustion engines: Design and calculation of the strength of reciprocating and combined engines. Mechanical Engineering, Moscow, 384 p.
Yamanin A.I., Zharov A.V. (2003) Dynamics of piston engines. Mashinostroenie, Moscow, 464 p.
Zhukovsky S.S. (1993) Molding materials and technology of the mold: the directory. Mechanical Engineering, Moscow, 431 p.
Zhukovsky S.S. (2010) Cold-hardening binders and mixtures for foundry rods and forms. Mechanical Engineering, Moscow, 256 p.








