Application of the operational transconductance amplifier (OTA) based low pass filter (LPF).
Abstract
This paper presents designing of first order low pass filter using Operational Transconductance Amplifier (OTA). This paper illustrates an application of OTA as an active low pass filter. The primary building block of an OTA is the current mirror. Different current mirrors are used to design the LPF & the corresponding frequency and phase responses are comparatively studied in this paper. With comparatively CMOS OTA & NMOS OTA are to study but also illustrated in this article.
References
Acosta, L. Mariano Jiménez, Ramón G. Carvajal, G. (2009). Highly Linear Tunable CMOS Gm-CLow-Pass Filter(J). IEEE Transactions on circuits and systems:2145-2158.
Carrillo, J.F. and Torelli, G. (2008). "1-V continuously tunable CMOS bulk-driven transconductor for Gm-C filters," 2008 IEEE International Symposium on Circuits and Systems, pp. 896-899, 2008.
Chatterjee, Y. Tsividis, and P. Kinget, (2005). 0.5-V analog circuit techniques and their application in OTA and filter design. IEEE Journal of Solid- State Circuits. 40(12), pp. 2373- 2387.
Geiger, D. and Sánchez-Sinencio, E. (1985). “Active filter design using operational transconductance amplifiers:A tutorial,” IEEE Circuits and Devices Magazine, vol. 1, pp. 20- 32, Mar. 1985.
Hsu, M. Ho, K. Wu, T. and Chen, H. (2006). “Design of low-frequency low-pass filters for biomedical applications,” in Proc. IEEE Asia Pacific Conference on Circuits and Systems, Dec. 2006, pp. 690-695.
Lee, G. Member, D. And Chih-Jen, C. (2009). "Systematic Design and Modeling Of A Ota-C Filter For Portable Ecg Detection", IEEE Transactions On Biomedical Circuits And Systems, Vol. 3, No. 1, pp.53-64.
Liu, X. Peng, and W. Wu, (2009). “Design of a Gm-C low pass filter with low cutoff frequency,” in Proc. Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics, pp. 125-128.
Mahapatra, M. Singh, and N. Kumar, (2009). “Realization of active filters using operational transconductance amplifier (OTA),” Journal of the Instrument Society of India, vol. 35, no. 1, pp 1-9.
Malvar, H. (1982). “Electronically controlled active filters with operational transconductance amplifier, ”IEEE Transactions on Circuits and Systems, vol. CAS 29, pp. 333-336.
Pan, D. Chiung-Cheng, C. Chung-Huang, Y. Yu- Sheng, L. (2009). A Novel OTA with Dual Bulk-Driven Input Stage, pp. 2721-2724.
Salman, M. A., & Borkar, V. C. (2016). New Method to Calculate the Matrix Exponential. International Journal of Engineering, Science and Mathematics, 5(1), 210-218.
Soliman A. Mahmoud, N. Ahmed, B. Saeed A. Al-Tunaiji, F. (2013). "Low-Noise Low-Pass Filter For Ecg Portable Detection Systems With Digitally Programmable Range", Circuits Syst Signal Process,Vol 32, pp.2029–2045.
Solis-Bustos, J. S. Martinez, F. Maloberti, and Sanchez-Sinencio, E. (2000). “A 60-dB dynamic-range CMOS sixth-order 2.4-Hz low-pass filter for medical applications,” IEEE Transactions on Circuits and Systems, vol. 47, no. 12, pp. 1391-1398, Dec. 2000.
Timar, F and Rencz, M. (2007). “Design issues of a low frequency low-pass filter for medical applications using CMOS technology,” in Proc. IEEE Design and Diagnostics of Electronic Circuits and Systems, pp. 1-4.
Veeravalli, E. Sanchez-Sinencio, D and SilvaMartinez, J. (2002). “Transconductance amplifier structures with very small transconductances:A comparative design approach,” IEEE J. Solid State Circuits,vol. 37, no. 6, pp. 770–775.
Villegas, A. Casson, J. and Corbishley, P. (2011). “A subhertz nanopower low-pass filter,” IEEE Transactions on Circuits and Systems II, vol. 58, no. 6, pp. 351-355.
Waldman, A. García, D. González, G. and Cordero. O. (2018). "Factores que determinan la selección de la universidad destino en el ámbito internacional." Opción 34.86: 235-258.
